Request for Colinbus machines in the advertising world is high. They are stronger and more rigid than the classical profile-based machines but much lighter and simpler to use than the heavy industrial ones. That makes the Colinbus machines highly appreciated instrument for people in the advertising world.
The possibilities!
With a Colinbus machine it is in fact possible to make almost anything that the advertising world needs. Depending on the chosen tools and the dimensions of the table one can produce models ranging from life-size buildings to miniature engraving models and all this is possible on the same machine. Due to the high precision table combined with the proper spindle motor, the largest tables can deliver highly accurate work. That is what makes the Colinbus machines so special: no excessive luxury, no extra weight but efficiency and profit-earning capacity. That capacity is made possible because of the high machining speed and most of all because of the fact that everything is easy-to-use. No loss of time because of programming and setting of machine parameters which is often the case with other machines. For Colinbus no programming is required and the input and preparation of files can even be done by a 9 year old kid.
Engraving letters
Light panels
Small and large 3-D models
Displays
Sign panels
Which machine to choose?
In the advertising industry all kinds of standard machines are used. Colinbus only uses routers which can all be used for advertising purposes. The exact choice depends on the required dimensions and the material that will be used. In most of the cases a CIR or CLR machine will be the best choice. Because of the central lead screw the CIR range is the least powerful. Thats is why the
working area is limited to 1250 x 1030 mm. If larger areas are required than the CLR range should be preferred. Regarding software and electronics all machines have the same possibilities. It is the mechanical construction and the power of the motors and drivers which makes the difference.
The CIR range:
Machine with central lead screw in the Y-axis. Value-for-money machine for simple milling work with a max. working area of 1250 x 1030 mm.
The CLR range:
Two motors and two precision lead screws in the Y-axis. On request these machine can be delivered with open front to make it possible to machine high pieces. Ideal for large work.
